rowing boat – Amateur Yacht Research Society

Innovation
Simple craft
Odd craft
Speed
Old designs
New designs
Challenges
Resources

Zoom Mtg. 2 May -Building a Sliding Seat Rowing Boat – John Perry

2nd May 20206th June 2020 John Perry 2 Comments rowing boat, stitch and glue, Water jet

For our previous meeting John covered the design of a sliding seat recreational rowing boat, he now continues with a

Zoom Mtg. 25 April 2020 – Designing a Sliding Seat Rowing Boat – John Perry

27th April 202017th June 2020 John Perry 0 Comments rowing, rowing boat, sliding seat

John Perry gave a presentation about the design process for a 4.57m (15 foot) sliding seat rowing boat, this presentation being followed by video demonstrating the design features. The construction and use of the boat will be the subject of a following meeting.

Craft • Re: Suboptimal waterstays for beach trimaran
Hi John,Thanks for your answer, I am truly sorry for answering you so late.I had two catamaran projects that came to a halt when my co owner left this world a few years ago. Now I am building a little bigger boat with an open cockpit and a small outborder to sail alone, so the […]
Hydrofoils • Re: Hinged Bruce foiler
my interpretation of your diagrams is that on the 'Lee tack' the arm supporting the hinge for the 'foil arm' is locked, so the system operates much like Gerald Holtom's foiling boats. Then you unlock the hinge as your tack?Yes. The figure in the first post is inconsistent. On the left, I drew, in orange, […]
Hydrofoils • Re: Hinged Bruce foiler
Robert - I have just noticed your thread here - it looks to be very intersting experiment. I am surprised that no-one else (to my knowledge, such as that is) has tried to develop the Giles Whittaker hinged foil. I would say that from the films Giles produced a good few years ago now, the […]
Hydrofoils • Re: Hinged Bruce foiler
The boat is finished. All that remains to be done is set up the running rigging, and wait for the beginning of the sailing season, in about half a yearHere you can see the boat with the frame tied to the hull, and the foil and beam upside down besides it. I can probably cut […]
Craft • Re: Sub-fora discontinued
Theo - I have voted 'yes' to this. At first I thought there was something wrong since my vote did not add to the total, then I realise you have to log into the forum to vote, which is logical. I do think the forum is better without so many sections - a heavily used […]